Replacing an ignition module typically costs between $200 and $530. This price covers the new replacement part and the professional labor required to install it.
However, the exact ignition control module cost will depend on your vehicle’s make and model, the physical location of the module, and other factors. A professional mechanic will always test the system to confirm a failed module before quoting a final price.
Keep reading to explore a full cost breakdown, the risks of delaying the repair, and the top signs your car needs a new module.
This Article Contains:
- How Much Does the Ignition Module Cost?
- Is It Worth Replacing Your Car’s Ignition Module?
- 4 Telltale Signs of a Faulty Ignition Module
- How a Mechanic Diagnoses and Fixes a Faulty Ignition Control Module
- How Long Does an Ignition Module Last?
- How Does the Ignition Control Module Work?
How Much Does the Ignition Module Cost?
Here’s a breakdown of the ignition module replacement cost:
A. Range
On average, expect to pay anywhere between $200 and $530 for a new car ignition module.
This typically includes:
- Parts: $120–$360, which covers the ICM module itself and related components.
- Labor costs: $80–$170, which covers the physical replacement labor based on shop rates and accessibility.
B. Factors Affecting Cost
The ignition control unit operates under different engine bay conditions. The overall ignition module price changes based on six main variables:
- Vehicle make and model: Replacing the ignition modules on luxury or high-performance vehicles often means higher part prices and labor costs.
- Part availability: If you drive an older or less common vehicle, parts can be harder to find. This scarcity usually pushes the ignition control module replacement cost higher.
- Module accessibility and location: Modules mounted externally on the fender wall or near the coil allow quick replacement. Conversely, modules buried underneath the intake manifold require significant disassembly, pushing labor charges toward the upper end.
- OEM vs. aftermarket parts: Original Equipment Manufacturer parts cost more but offer proven reliability. Aftermarket parts are cheaper but can vary in quality.
- Pre-diagnosis: Shops often charge a separate fee, typically $50 to $150, to confirm a faulty ignition control module before doing any work.
- Additional repairs: A mechanic may recommend fixing related parts if they find any faults. Replacing an ignition coil could add an extra $85–$470, a set of spark plug wires might run between $190 and $229, and an ignition switch could cost $200–$310.
Given those prices, you might wonder if replacing a faulty ignition control unit is really necessary.
Is It Worth Replacing Your Car’s Ignition Module?
Yes, you should fix a failing ignition module as soon as possible. Putting off this repair to save money usually backfires. This small electronic device acts as the command center for your spark plugs. When the igniter module starts glitching, the engine loses spark control and can misfire or shut down without warning.
Driving with a bad ICM can also cause bigger issues like:
- Unpredictable stalling, especially at intersections or in traffic.
- Hard starts or repeated cranking, which strains the battery and starter.
- Inconsistent engine timing, reducing power and efficiency.
- Catalytic converter damage from unburned fuel entering the exhaust, which can lead to more severe and costly issues down the line.
In extreme cases documented in manufacturer recalls, prolonged operation after a module failure can cause secondary failures of the oxygen sensor and exhaust resonator, potentially leading to an undercar fire.
However, before your car develops more serious problems, you may notice these four warning signs.
4 Telltale Signs of a Faulty Ignition Module
Here are some symptoms that can point to a failing ignition control module:
- Active check engine light: Any issue with the ignition system will trigger the check engine light on your dash. The car’s computer will register a related trouble code, such as P0300 (Random/Multiple Cylinder Misfire) or P0351 (Ignition Coil A Primary/Secondary Circuit).
- Sudden engine stalling (especially when hot): Internal thermal breakdown causes degrading modules to shut the vehicle off abruptly once engine bay temperatures rise. Your car may refuse to restart until it cools down, while weak signals can cause stalling at idle.
- Engine misfires, hesitation, and power loss: An intermittent module drops timing signals to individual ignition coil modules, leading to incomplete combustion in one or more cylinders. You will notice the engine shaking at idle, jerking during acceleration, or sputtering when climbing hills.
- Engine cranks normally but won’t start: When you turn the ignition key, the starter motor turns the engine over normally. However, a failed module prevents the ignition control system from delivering spark to the cylinders.
If you spot any of these signs, here is exactly how a mechanic will pinpoint the problem.
How a Mechanic Diagnoses and Fixes a Faulty Ignition Control Module
Ignition-related components like a faulty spark plug, damaged spark plug wires, worn ignition coils, etc., are often misdiagnosed as a defective ignition module. So, a mechanic will inspect these parts first and replace them before checking the ignition module.
Here are the steps a mechanic will follow to confirm the issue and replace the car ignition module correctly:
- OBD-II code scan and visual inspection: The mechanic will scan for stored trouble codes, like P0300–P0308 or P0350–P0358, and check the connectors for corrosion or thermal damage.
- Inline spark and coil resistance test: They’ll verify spark delivery using an inline tester and measure the coil’s resistance with a multimeter to rule out a bad coil.
- Module power, ground, and signal test: Next, they’ll confirm the module receives 12V power and a good ground, then check for switching signals. A missing pulse confirms a faulty module.
- Disconnect battery and clear access: Once confirmed, they’ll disconnect the negative battery terminal and clear away any components blocking the ignition modules.
- Remove old module and clean mounting surface: They unbolt the failed part and scrape away old thermal grease from the heat sink bracket to ensure a clean fit.
- Apply thermal paste and install a new module: They apply fresh dielectric heat-sink compound, bolt the new unit to specification, and test-fire the engine.
NOTE: Ignition-related components like a faulty spark plug, damaged spark plug wires, worn ignition coils, etc., are often misdiagnosed as a defective ignition module. So, a mechanic will inspect these parts first and replace them before checking the ignition module.
With the repair complete, you might be wondering about the lifespan of your new part.
How Long Does an Ignition Module Last?
An ignition control module typically lasts between 100,000 and 200,000 miles. However, it can fail much sooner due to extreme engine heat, electrical voltage spikes, or general wear and tear.
There is no fixed replacement schedule for these parts. Regular vehicle maintenance and quick attention to early warning signs, like misfires or hard starts, can help extend the life of your ICM.
How Does the Ignition Control Module Work?
The ignition module controls the timing and firing of the spark plugs in the engine. It receives information in the form of signals from the engine’s sensors, like the crankshaft position sensor, to determine the precise timing for firing the spark plugs.
The ICM then sends an electrical current to the ignition coil, which amplifies the voltage and sends it to the spark plug set. This controlled spark ignites the air-fuel mixture in the engine cylinders to power the engine.
Maintain a Reliable Ignition System with AutoNation Mobile Service
The ICM plays a vital role in keeping your engine running smoothly. Replacing a faulty module promptly can help prevent costly engine repairs and reduce the risk of unexpected breakdowns.
Can’t drive your car to the repair shop?
AutoNation Mobile Service offers expert care at your convenience — right from your driveway!
Our expert mechanics are available seven days a week and come right to your location. For extra peace of mind, we offer upfront pricing and a 12-month, 12,000-mile warranty on all repairs.
Contact us to get your car back on the road in no time.