Home
Blog Dashboard Lights TPMS Light On: What It Means & How to Address It
Dashboard Lights

TPMS Light On: What It Means & How to Address It

Looking for a mechanic near you for maintenance or repair? AutoNation Mobile Service brings the shop to you. Get a free instant quote today.
Get a Quote

If your TPMS (Tire Pressure Monitoring System) light is on, it usually means one or more tires are significantly underinflated. In the U.S., TPMS is required to warn drivers when tire pressure reaches about 25% below the vehicle manufacturer’s recommended level. The light may also sometimes indicate a problem with the TPMS itself.

Common causes:

What to do:

IMPORTANT: Failing to pay attention to an active TPMS alert can compromise your vehicle’s handling and increase the risk of accidents.

If you want to know more, we’ll explain what different TPMS light behaviors mean, what causes the warning, and how to fix or reset the system.

This Article Contains:

What Does It Mean if Your TPMS Light Is On?

When the TPMS warning light turns on, it usually indicates the system has detected a potential issue, such as low pressure in one or more tires. The warning appears as a horseshoe-shaped symbol with an exclamation point in the center.

Depending on the vehicle, TPMS can monitor tire pressure directly through sensors inside the wheels or indirectly using wheel-speed data from the anti-lock braking system (ABS). When the system detects a pressure-related issue, it’ll illuminate the TPMS warning light on the dashboard.

Some modern vehicles can also display the affected tire, giving you quick access to its pressure reading. This can save time during the diagnosis.

NOTE: TPMS is one of several vehicle safety technologies, along with ABS, electronic stability control (ESC), and traction control. These technologies help improve vehicle control, stability, braking, and overall driving performance.

Knowing what the light means is the first step. The next question is how serious this warning is.

How Urgent Is an Active TPMS Light?

An active TPMS light shouldn’t be ignored.

If the light is caused by low tire pressure, continued driving can increase tire wear, cause excessive heat buildup, and eventually lead to tire failure. If the warning indicates a TPMS malfunction instead, the vehicle may not reliably alert you to pressure-related issues.

The warning deserves attention because ignoring it can compromise your safety on the road and potentially lead to accidents.

To further understand how urgent the issue may be, pay attention to whether the TPMS light stays solid, flashes, or comes on and off.

What Does a Solid, Flashing, or On-and-Off TPMS Light Mean?

The nature of the tire pressure light can provide clues about what’s happening:

Now that you know what the light is signaling, let’s understand how to clear it.

How to Reset the TPMS Light

In many cars, the TPMS light will turn off automatically once all tires are inflated to the proper pressure. However, in some vehicles, you need to reset it manually.

If you reset the light without fixing the underlying issue, the system may give false alerts or miss real problems. That’s why it’s best to schedule service with an auto repair professional.

Here’s what they’ll do:

  1. Check and adjust the pressure: They’ll use a tire pressure gauge to ensure all your tires (even the spare) are inflated to the proper air pressure level. This information is usually listed on the driver’s side door placard or in your vehicle’s owner’s manual.
  1. Use the TPMS reset button: Some cars may have a TPMS reset button near the dashboard or under the steering wheel. If your vehicle has one, the mechanic will turn the ignition on, then press and hold the button until the light blinks.
  1. Drive to auto-reset: In many modern vehicles, once the tires are inflated, the system may reset automatically after driving at a steady speed for some time. The exact procedure and duration vary by vehicle. For example, the Tesla Model 3 requires driving at least 15 mph for 1–3 minutes to reconnect with the TPMS sensors. But some Kia vehicles require about 20 minutes of driving after a TPMS reset.
  1. Diagnose and repair TPMS faults: If the light remains on or flashes despite proper pressure, the TPMS may need further inspection. A mechanic may access the sensor inside the steering wheel to replace a faulty unit, repair damaged sensor wiring, or replace a dead battery.

But what caused the tire pressure light to come on in the first place?
Let’s find out.

What Causes the TPMS Light to Turn On?

The TPMS light can turn on for several reasons, including:

  1. Underinflated tires: Low tire pressure is a common reason the TPMS indicator turns on.
  1. Hitting a curb or pothole: A hard impact can damage the tire, wheel, or TPMS sensor. If the impact damages the sensor or affects its connection, the TPMS may detect a fault and trigger the warning light.
  1. Extreme temperatures: Hot or cold weather can change tire pressure enough to trigger the warning. Cold weather can lower tire pressure by about 1 PSI for every 10°F drop in temperature.
  1. TPMS corrosion: Corrosion can interfere with the sensor’s electrical connection and prevent it from providing accurate air pressure information to the vehicle. This can trigger the TPMS light.
  1. Low or depleted TPMS sensor battery: A weak or dead battery may stop the sensor from transmitting pressure information. The resulting TPMS malfunction can trigger the warning light because the system can’t reliably monitor tire pressure and warn you about a potential issue.
  1. Improper TPMS sensor installation: An incorrectly installed sensor is another common reason it may fail to communicate properly with the vehicle.
  1. Damaged or malfunctioning TPMS sensor: A damaged sensor may fail to provide an accurate reading or communicate properly with the vehicle.
  1. Wireless frequency interference issues: Other strong radio-frequency interference can temporarily disrupt communication between TPMS sensors and the vehicle, causing a malfunction warning.
  1. Aggressive driving: Hard cornering, braking, or acceleration can temporarily affect pressure readings, even when the correct tire pressure is maintained.

Rather than repeatedly resetting the warning, some drivers may wonder whether they can disable it altogether.

Can You Permanently Disable the TPMS Light?

No, permanently turning off the TPMS warning light isn’t recommended.

The TPMS is a safety system designed to alert you when tire pressure falls to an unsafe level, so disabling it removes an important warning. 

Since 2008, most passenger vehicles sold in the U.S. have been required by federal law to have a tire pressure monitoring system. This typically triggers a warning when tire pressure drops about 25% below the vehicle manufacturer’s recommended pressure.

That covers the main TPMS indicator concerns.
Before we wrap up, let’s address a few other common TPMS questions.

3 FAQs About the TPMS Alert

Here are answers to some common doubts drivers have about this warning light:

1. Do You Still Need to Manually Check Tire Pressure Even With a TPMS?

Yes, you should still manually check your tire pressure even if your vehicle has TPMS.

The TPMS is designed to warn you when tire pressure drops significantly, but it doesn’t replace regular pressure checks. Sensors can malfunction or wear out, failing to provide an accurate reading. Tire pressure can also change with temperature or develop gradually without immediately triggering a warning.

Regularly checking tire pressure with a tire gauge helps keep your tires properly inflated and can extend tire life while supporting better handling and performance.

2. What’s the Difference Between a TPMS and a Tire Pressure Control System?

The TPMS monitors tire pressure and alerts you when pressure falls below a set threshold. A tire pressure control system, on the other hand, can actively adjust or maintain correct tire pressure, depending on the vehicle and system.  

To confirm which system your vehicle is equipped with, check your vehicle’s owner’s manual.

3. What Are the Different Types of TPMS?

There are two main types of TPMS— direct and indirect. A direct TPMS uses pressure sensors mounted inside each tire to measure air pressure and send the readings to the vehicle’s computer. An indirect TPMS doesn’t use dedicated pressure sensors. Instead, it uses wheel-speed sensors from the ABS to detect changes in tire rotation that can indicate pressure loss. 

Protect Your Tires With Expert TPMS Service

A TPMS warning can be caused by something as simple as low tire pressure or signal an underlying issue with the monitoring system. Either way, it’s worth getting it checked.

With AutoNation Mobile Service, expert technicians come to you on all days of the week and diagnose the issue right in your driveway. We provide the repair price upfront and back every service with a 12-month | 12,000-mile warranty.

Schedule your TPMS inspection today and get it fixed without leaving home.