Estimates Trouble Codes P2196

P2196: O2 Sensor Signal Stuck Rich (Bank 1 Sensor 1)

Our mobile mechanics can quickly diagnose a P2196 trouble code and bring the shop to you 7 days a week. Get a quick and fair quote today.

Find Your Cost

(2,074 Reviews)

What is P2196?

The P2196 code is a generic diagnostic trouble code (DTC) defined as the O2 Sensor Signal Stuck Rich (Bank 1 Sensor 1.) This code pertains to the front oxygen sensor (located before the catalytic converter) on Bank 1.

The P2196 fault code is stored by your vehicle’s computer when the front oxygen sensor in Bank 1 detects a rich airfuel ratio (more fuel, less oxygen) in the exhaust manifold. 

The front oxygen sensor is responsible for monitoring the air-fuel ratio in the exhaust manifold and transferring the information to the powertrain control module (PCM.) The powertrain or engine control module (ECM) compares this information from the oxygen sensor to the outside air to ensure the engine runs on an ideal air fuel ratio. 

If excessive fuel is injected into the combustion chamber, the powertrain control module will log error code P2196.

Common symptoms

Here are the most common symptoms associated with the error code P2196: 

  • Check engine light comes on: A flashing check engine light is the most prominent sign of an engine error code. While this symptom isn’t necessarily an indication of DTC P2196, a lit check engine light on your dashboard means there’s an engine-related problem.
  • The engine lacks power or misfires: If your engine has been misfiring or lacking power, it could be due to error code P2196. Typically, this occurs when there’s a lack of oxygen in the combustion chamber. 
  • Fuel consumption shoots up: A faulty front oxygen sensor could misread the oxygen levels from the combustion chamber, causing the fuel injector to pump excess fuel into the engine. This sudden spike in fuel consumption is commonly associated with error code P2196, amongst other engine-related issues. 
  • Black smoke from the exhaust: Your vehicle’s exhaust system requires a balanced fuel and air supply to function properly. However, if your car runs on a rich air-fuel ratio, it burns more fuel, resulting in black smoke or exhaust gas billowing out. Here, you should have the air filter, fuel injector, EGR valve, MAF sensor, and the 02 sensor (Bank 1 sensor) diagnosed at a repair shop.

Can I still drive?

The fault code P2196 may not necessarily pose immediate drivability issues. However, if left unresolved, it could result in a damaged catalytic converter, purge valve, and decreased fuel efficiency, eventually leading to fatal engine damage. 

Typically, the trouble code P2196 will trigger the check engine light on your dashboard. When this happens, it’s best to have your vehicle diagnosed at a reputable repair shop.

P2196 causes

Here are some of the most common triggers for trouble code P2196: 

  • O2 sensor circuit wiring or connector is broken or frayed
  • O2 sensor circuit (bank 1 sensor 1) is faulty 
  • Front heated oxygen sensor (bank 1 sensor 1) is open or shorted
  • The electrical connection of the front heated oxygen sensor (bank 1 sensor 1) is faulty 
  • Mass Air Flow sensor (or MAF sensor) is faulty or dirty
  • There’s a vacuum leak or exhaust leak
  • Fuel pressure regulator is faulty, or the fuel pressure is too high
  • Exhaust system is faulty 
  • Engine coolant temperature sensor has gone bad
  • Powertrain control module is malfunctioning


Here’s a step-by-step look at how an expert mechanic will go about diagnosing error code P2196: 

  • Your mechanic will begin by connecting an OBD-II scan tool to scan the P2196 sensor code stored in your vehicle’s powertrain or engine control module. 
  • They’ll also use the OBD-II scan tool to scan readings and monitor the short and long-term fuel trim values. 
  • Next, the mechanic will review the O2 oxygen sensor (Bank 1 Sensor 1) data, ensuring it oscillates between 0.1 and 0.9 volts.
  • After reviewing the data, the mechanic will check for a malfunction by introducing outside air into the intake manifold while reducing the fuel inflow. Here, reducing the fuel inflow significantly depends on access to the fuel injector. 
  • In some vehicle models, the mechanic may need to create a vacuum leak on the affected bank of cylinders. They’ll do this by removing the vacuum hose, allowing more air into the intake manifold. 
  • Next, the mechanic will visually inspect the catalytic converter for damages. 
  • And finally, they’ll also look for clogs or blockages in the MAF sensor.

Common mistakes when diagnosing P2196

Conducting a diagnosis for the P2196 code requires appropriate tools and technical expertise. It also requires the technician to check every component in a step-by-step process. Failing to do so could result in an incorrect diagnosis or perfectly good components being replaced.

Possible repairs for P2196 & Costs

Fixing the trouble code P2196 may require repairing and replacing multiple issues and components. 

Here are some of the possible repair solutions: 

  • Replace a faulty fuel pressure regulator, fuel injector, engine coolant temperature sensor, MAF sensor, or oxygen sensor
  • Replace or repair the wiring connected to the engine coolant temperature sensor
  • Replace or the repair a damaged spark plug, spark plug wire, coil pack, or ignition wire

And here are the estimated repair costs for trouble code P2196: 

  • New o2 oxygen sensor: $200-$300
  • Welding an exhaust leak or vacuum leak: $100-$200 each
  • New fuel pressure regulator: $200-$400
  • Labor costs: $100-$150

How It Works

Tell us about your vehicle

Select your vehicles year, make, and model and the repair service you need.

Book online

Get a free quote, book an appointment, and speak to a specialist – all online!

Schedule your repair

Pick a time that works best for you and our mobile mechanics will bring the shop to you.

Get a Quote

certified 12-Month | 12,000-Mile Warranty

We're here to keep you moving

Our experienced mobile mechanics are ready to help.

Get a Quote

1-Year | 12,000-Mile Warranty