Blog Car Care Advice Brake Caliper Sticking: 6 Causes, Symptoms & FAQs
Car Care Advice

Brake Caliper Sticking: 6 Causes, Symptoms & FAQs

Looking for a mechanic near you for maintenance or repair? AutoNation Mobile Service brings the shop to you. Get a free instant quote today.
Get a Quote

If you’ve been driving along only to notice that your car is pulling to one side or unexpectedly slowing down, then you may have a stuck brake caliper.

Brake calipers engage the brake pads, forcing them to secure the brake rotor. Once you release your brake pedal, the brake pads should disengage, allowing the rotor to move freely. 

But this doesn’t always happen. 

It’s possible that you’re experiencing brake caliper sticking but what does that mean, exactly?

In this article, we’ll answer that question. 
We’ll also look at the potential causes of stuck brake calipers, the symptoms involved, how to diagnose and fix a stuck brake caliper, and answer some common FAQs.  

This Article Contains

Let’s begin. 

What Does It Mean When You Have “Brake Caliper Sticking”? 

A “sticking brake caliper” is a brake caliper on a disc brake that fails to release, even when the brake pedal is not being applied.

Essentially, the brake pads are still in contact with the rotor while the wheel is turning. This leads to constant friction and brake drag.   

Brake calipers can get stuck on both the front and rear wheels. However, most economy cars usually have rear drum brakes instead of disc brakes (meaning the brakes don’t feature a rear caliper). In that case, only the front brakes will experience caliper sticking. 

Now that you know what brake caliper sticking is, let’s investigate why it happens.

What Causes a Brake Caliper to Stick? 

There are many components to your car’s brakes
Here are some brake issues that may result in a sticky brake caliper:  

1. Worn or Faulty Brake Caliper Bolts

There are two ways the brake caliper bolts can cause a sticky caliper:

What causes these issues with the rubber slides?
Usually, when mechanics aren’t careful enough, they can tear the slides when installing new brake pads.

Applying grease and brake cleaner to rubber slides may help temporarily, but ideally, you should see a mechanic to have them checked. 

2. Seized-Up Slider Pins  

The caliper slide pin allows the caliper to engage and release freely. Each slide pin is covered by a small protective boot designed to stop water and debris from entering.  

When this protective boot wears out, debris or water can enter the slide pin bore, resulting in corrosion and friction between the bore and the caliper slide pin. 

In extreme cases, the pins can seize up completely, causing the caliper to get stuck.  

3. Seized-Up Brake Caliper Piston

Brake caliper pistons allow the brake pad to come into contact with the brake rotor. When the brakes are applied, brake fluid is sent to the caliper, causing the pistons to engage the brake pads.

When the brake caliper piston’s protective rubber boot gets torn, debris can accumulate in the caliper. The piston struggles to slide smoothly, causing the brake caliper to stick. 

Why does the rubber boot get torn?
This often occurs when the piston is retracted back to the brake caliper during brake pad replacement. 

You can avoid this sticky caliper situation by getting your replacement done by a professional mechanic.

4. Brake Line Obstruction or a Faulty Brake Hose

Obstructions or damage to the brake hose or brake line results in the brake fluid being unable to return to the master cylinder.

Why does brake hose damage cause the brake caliper to stick?
Fluid converts the force of the brake pedal into hydraulic pressure, which is applied to the brakes. If the fluid can’t escape to the master cylinder, the pressure on the brake remains. 

5. Debris and Stuck Brake Pad Shims

As mentioned previously, debris and brake dust accumulation in various parts of the brakes often cause brake calipers to stick. 

This is also the case with brake pad shims. 

What are brake pad shims?
Brake shims are essentially a barrier between the brake pad and the caliper. They absorb vibrations and reduce noise.

When debris or brake dust accumulates in the spaces between the brake pad shims and the brake caliper or if they get caught, the brake pads cannot move in and out properly. 

6. Parking brake Issues

If your car has a brake disc in each rear brake, then the parking brake can also cause a rear caliper to stick.

If the parking brake gets stuck, the rear brake disc will remain engaged. This can happen due to cold weather (causing the mechanism to freeze), rust, or corrosion. 

Sometimes applying grease to the parking brake system can help unstick the rear brake. But you may also need a mechanic to take a look. 

Now you know what causes a sticking brake caliper.
But what can you expect if it happens to your brakes?

What Are the Symptoms of a Sticking Brake Caliper?

There are several symptoms you may notice if you have a sticking brake caliper. 

Let’s take a look: 

1. Car Pulling to One Side

One significant indicator that your caliper is stuck is if your car pulls to one side. 

An engaged brake pad means one wheel turns slower than the others, which will apply a rotational force to the vehicle.  

2. Abnormal Noise

Because the brake pad is still engaged, it constantly rubs against the brake rotor. This results in fast and atypical wear on the brake pads.

Grinding or scraping noises, especially when they come from one wheel, are often a sign of abnormal brake pad wear caused by a sticking caliper.  

3. Smoke or Burning Odor 

When the brake caliper is stuck, excess heat is produced by friction between the brake pads and the rotor. As a result, you may notice smoke or a burning odor rising from the affected wheel. 

Warning: This excessive heat can also lead to brake fade, which is very dangerous.  

4. Car Unexpectedly Slowing Down

The constant contact between a brake rotor and the brake pads can make the car feel like it’s slowing down. This happens regardless of whether or not you have applied the brake pedal.  

5. Steering Wheel Vibrations

The excessive heat between the brake pads and the rotor can cause a rotor to become warped (abnormally bent). In cases of excessive heat, you also need to worry about brake fade.

When brake pads come in contact with an extremely warped rotor surface, the rubbing can cause your steering wheel to vibrate. 

6. Reduced Fuel Economy

More friction from the sticky brake means more energy is required to turn the wheels. Essentially, your engine needs to work harder to turn the wheels, so it will use more fuel in the process.  

While it’s important to know about the causes and symptoms of a stuck brake caliper, you must also know how to diagnose and fix it.

How to Diagnose and Fix a Stuck Caliper?

To begin diagnosing a stuck caliper, you need to locate the wheel where the caliper is sticking. 

To do this, take note of:

While these methods may point you in the right direction, the best way to diagnose a caliper is to investigate each caliper after removing the wheel and the caliper bracket. 

Note: If you’re not confident removing the caliper bracket and inspecting the brake system yourself, it’s best to have a mechanic do the job for you. 

A mechanic will look for the following signs of a stuck caliper:

In some cases, applying brake cleaner and brake grease to the problem area may fix a stuck caliper. But in most cases, the caliper must be rebuilt or replaced. 

Still curious about sticking brake calipers? 
Have a glance at some of the most frequently asked questions below. 

4 FAQs About Sticking Brake Calipers

Here are answers to some important questions asked about sticking brake calipers: 

1. Is Driving With a Stuck Caliper Safe?

It’s not advisable to drive with a stuck caliper. 

Driving with a stuck caliper is not only unsafe, but it can cause significant damage to the brake rotor and compromise your road safety. 

If you are experiencing caliper sticking, have your brake system checked by a mechanic

2. How Can I Prevent a Brake Caliper from Sticking?

There are two ways to ensure your brake calipers don’t stick:

Also note the different parts of the brake system (guide pins, brake pads, etc.) have different recommended service periods.    

3. How Much Does It Cost to Fix a Seized Brake Caliper?

To fix or replace your brake calipers, you can expect to pay between $100-$2100. The cost involved will depend on:

4. Should I Replace or Rebuild My Brake Caliper? 

Rebuilding the brake caliper is a more affordable option. But it is likely that over time, the caliper will stick again, especially if the cause is the piston or slider pins. 

While there are caliper rebuild kits available on the market, they are mainly for fixing smaller issues to lengthen the life of the caliper. 

In the long run, you’ll likely need to replace your caliper if there are any major issues. 

Final Thoughts 

Sticking brake calipers are a nuisance. Driving with a sticky brake caliper can cause undue damage to your vehicle and even endanger your life on the road. 

If you think one of your brake calipers is sticking, contact AutoNation Mobile Service

AutoNation Mobile Service is a mobile mechanic service that comes to you to diagnose and fix your car troubles. 
Here’s why you should choose us: 

Fill out this form to get an estimate for your brake caliper replacement