10W50 oil is a high-performance engine oil that offers outstanding engine reliability and temperature stability under extreme driving conditions.
It’s used for a wide range of motorsports and modern engines with turbochargers.
But, should you be using 10W-50 oil?
And how is this oil different from other viscosity grades?
In this article, we’ll explore the 10W50 motor oil in detail, along with its uses.
We’ll also answer some questions, including whether 10W50 is a synthetic oil and if it’s suitable for high mileage applications.
This Article Contains:
- What Does 10W-50 Mean In Oil?
- What Is 10W-50 Oil Good For?
- 4 FAQs About 10W50 Oil
Let’s get started!
What Does 10W-50 Mean In Oil?
10W-50 is a heavy-duty multi-grade oil crafted to support an engine’s maximum performance at a very high operating temperature.
Wondering what those numbers mean?
10W-50 follows the Society of Automotive Engineers (SAE) format for a multi-grade oil, where W stands for winter.
The number preceding the W (i.e.,10) denotes the oil flow at 0°C. The lower this number, the better the W oil will perform in winter (by not thickening).
The number after W (i.e., 50) stands for the viscosity rating at peak temperatures. The higher this number, the better is the oil’s resistance against thinning at a high temperature.
Meaning, 10W-50 motor oil acts like an SAE 10W weight oil under 0°C (32°F), and an SAE 50 weight engine oil at 100°C (212°F).
As a result, this multi-grade oil has minimal viscosity loss at a higher operating temperature. It can run through critical engine parts without causing too much friction or engine wear. On the other hand, this engine oil can remain stable at as low as -30 °C.
However, it’s a comparatively thicker oil, made for extreme operating conditions, so it may not perform well at a lower temperature. If you live in a colder region, you might want to consider a thinner oil for a quick cold start, like a 0W-20 or 5W-30.
So what are the extreme operating conditions that call for 10W-50 engine oil?
What Is 10W-50 Oil Good For?
10W-50 oil weight is designed for a variety of motorsport applications and high-performance vehicles.
It can withstand hotter ambient temperatures with minimum viscosity loss and without compromising the engine performance, making it suitable for:
- Consistent clutch feel in modified high performance vehicles
- A wet clutch in a four-stroke motorcycle or dirt bike
- Engines operating in high temperature climates
- Passenger cars with turbochargers and supercharged forced induction engines
- Heavy-duty diesel engines that need slightly thicker oil to prevent friction and engine wear
- Engines with catalytic converters for oxidation and reduction of toxic by-products
10W-50 can also work well under higher oil pressure environments and adhere to the engine without thinning out.
Besides these basic functions, this high viscosity oil also offers:
- Better oxidation resistance at a higher operating temperature
- Better fuel economy because of easy running characteristics and low oil consumption
- Higher viscosity index (VI) provides thicker oil film in bearings and cams to prevent corrosion or engine wear
- Higher detergent and dispersant properties to prevent sludge formation
- Extended drain intervals
- Decent cold start behavior
However, keep in mind that 10W-50 is a thicker lubricant and is only recommended for certain high-performance vehicles. If you’re going for an oil change, it’s best to stick to the weight recommended by the engine manufacturer.
Now, let’s explore a bit more about this higher viscosity oil through some commonly asked questions.
4 FAQs About 10W50 Oil
Here’re some of the questions you may have about using 10W50 motor oil for your vehicle:
1. How Is 10W-50 Oil Different From Other Oils?
The difference depends on the weight oil you’re comparing it with.
For example, compared to a higher viscosity oil like 20W-50 or 30W-50, all these oils are thick grades resistant to thinning at high-temperature settings.
These oils adhere to engine components even under high oil pressure, keeping engine parts well lubricated for maximum performance.
However, 10W50 is a much heavier weight oil if compared to a thinner oil, like 5W-20.
While 10W50 oil will perform better at a high temperature, this lubricant won’t hold up as well in low-temperature climates, making a cold start difficult.
2. Can I Use 10W-50 Instead of 10W-40 grade?
If opting for a synthetic oil variant of 10W-40 or 10W-50 grade, they both essentially use the same synthetic base oils. However, the difference comes from the additive package.
Today, most engines are designed and tuned for a specific oil viscosity, and switching to a higher viscosity oil can put too much pressure on your engine. It can also affect your vehicle performance, mileage, and fuel economy.
So, if you’ve got a modern engine that calls for 10W-40 as the manufacturer recommended grade, it’s best to stick to the same viscosity.
3. Is 10W-50 Oil a High Mileage Motor Oil?
The higher viscosity of 10W-50 grade oil offers outstanding cleaning and sealant characteristics. It can extend the engine life of older vehicles with 60,000 miles or more on them.
That said, as engine technology has advanced over the last decade, newer engines now have smaller and narrower oil pathways. This means they need a thinner oil that can easily move around to protect and prevent wear and corrosion of metal surfaces.
So, newer cars with a high mileage engine may not benefit from a thicker lubricant like 10W50. Instead, using a high mileage version of the engine’s required viscosity can offer better mileage and fuel economy.
4. Is 10W-50 Oil A Synthetic Oil?
10W-50 engine oil is available in different variants, including conventional (mineral oil), fully synthetic, and blends with synthetic base oils.
The conventional mineral oil variant is produced using refined crude oil as the base oil with certain high-performance additives.
While it’s cheaper than others, it’s less resistant to oxidation at high-temperature settings and breaks down faster.
The 10W-50 synthetic blend features some characteristics of synthetic oil, offering better stability and smooth engine function.
However, a fully synthetic variant outperforms the other two at peak temperatures in modified high-performance vehicles.
Note: It’s best to consult your vehicle owner’s manual or mechanic before switching between mineral oil or a synthetic variant, as some cars require a specific oil type.
10W-50 offers outstanding protection for heavy-duty vehicles and high-performance engines with turbochargers. It also provides better confidence in clutch-feel in four-stroke motorcycles.
Its higher viscosity keeps the piston and other engine parts well lubricated under extreme operating conditions.
However, to maintain the overall health of your vehicle, it’s best to consult your mechanic when choosing the right oil, and don’t forget to keep up with routine maintenance such as an oil change.
And, if you’re looking for a reliable car repair and maintenance solution with certified mechanics, contact AutoNation Mobile Service!
We’re a mobile car repair service offering competitive, upfront pricing and a range of maintenance services.
Simply fill out this form to get a quote for an oil change service.